Aluminum window systems for residential developments and commercial projects — thermal-break frames engineered for energy efficiency, sound reduction, and long-term weather resistance.
Our aluminum window systems are engineered around thermal-break technology — a structural barrier between the inner and outer frame that stops heat and cold transferring through the profile. Every window is rated for wind load, water penetration, and air infiltration before it leaves the factory. Project buyers receive a full performance data sheet with each order, not just a product description.
A structural polyamide barrier runs through the center of every aluminum profile, separating the inner and outer frame sections. This stops heat and cold transferring through the frame — the most common failure point in standard aluminum windows.
Double and triple glazing units are assembled with low-E coated glass and argon-filled cavities for maximum thermal and acoustic performance. Glass thickness and spacer depth are specified to the project’s climate zone and noise exposure.
Every window is tested for air infiltration, water penetration, and wind load resistance before leaving the factory. Three-stage perimeter sealing — compression, brush, and drainage — handles driving rain and pressure differentials that single-seal systems can’t.
Frames are available in powder-coated, anodized, and wood-effect finishes. Powder coating is applied at 60–80 microns for corrosion resistance in coastal and high-humidity environments. All finishes carry a 10-year surface warranty as standard.
Thermal-break frames have a polyamide barrier that stops heat transferring through the profile. In warm climates, this keeps interior surfaces cooler and reduces air-conditioning load — the benefit runs both ways, not just in cold weather.
Powder-coated frames are available in any RAL color — send us the reference and we'll match it. Anodized finishes run from natural silver to dark bronze. Wood-effect finishes coordinate with our interior door and wall panel lines.
Every window is produced to the opening dimensions supplied by the buyer. We don't work from a standard size catalog — send us the facade drawing and we'll cut to spec.
We supply complete window units — frame, glazing, hardware, and seals assembled and tested together. Frames-only supply is available for projects where glazing is sourced locally, though we recommend complete units for performance warranty purposes.
Our standard systems are rated to Class 3 water tightness and Class C3 wind resistance. Higher ratings are available for coastal, high-rise, and typhoon-zone projects — specify the building standard when submitting the brief.
Each order ships with a performance data sheet covering thermal, acoustic, air, and water test results. CE marking documentation and test reports are available on request for projects requiring regulatory sign-off.
