Decorative wall panel systems for residential and hospitality interiors — supplied in matched batches so grain, tone, and texture stay consistent across every wall in the project.
Wall panels are produced and delivered in full-room sets — every panel for a single wall comes from the same material batch, cut in sequence, and labeled for installation order. Finish options run across the same system as our door and wardrobe lines, so a room can carry one continuous material reference from floor to ceiling. Feature walls, headboard panels, corridor cladding, and lobby installations are all standard applications.
Panel cores are moisture-resistant MDF or multi-layer plywood, selected based on the installation environment and finish type. Core thickness runs from 9mm to 18mm — thicker cores carry heavier veneers and provide better acoustic damping for the room.
Faces are finished in real wood veneer, lacquer, fabric wrap, stone-effect laminate, or fluted profiles — applied and cured before the panels leave the factory. No site finishing required; panels arrive ready to install.
Every panel in an order is cut from the same material batch, numbered in installation sequence, and packed in order. Grain direction, tone, and texture are continuous across the full wall — not matched by eye on site.
Panels are supplied with the appropriate fixing method for the substrate — adhesive for solid walls, aluminum clip systems for stud partitions, and batten systems for uneven surfaces. Fixing hardware ships with the panels.
Every panel for the same wall is cut from a single material batch and numbered in installation sequence before packing. Grain direction and tone are continuous across the full run — not matched visually on site after delivery.
Yes. Fluted, flat, and grooved profiles can be specified panel by panel within a single order. We produce them in the same finish batch so the surface color and tone stay consistent regardless of the profile shape.
Moisture-resistant MDF cores with fully sealed edges are available for wet-area applications. Surface finishes for these environments are specified differently — tell us the room type when placing the order and we'll recommend the right combination.
Flat panels with adhesive or clip fixing are straightforward for any experienced contractor. Fluted profiles and large-format veneer panels benefit from an installer familiar with sequenced panel layouts — we supply numbered installation drawings with every order.
Our slimmest panels run at 9mm core with a 0.6mm face, giving a total thickness of under 10mm. At that depth, panels can be adhered directly over a flat existing wall without adding significant projection to the room.
Send us the finish reference from the original order — batch number, material code, or a physical sample — and we'll match it within standard production tolerances. A sample panel is produced for approval before the full run starts.
